How to add a Konica Minolta iOption device

This task explains how to create a device profile for the Konica Minolta iOption Unified Client. The profile enables you to manage Unified Client, AutoStore, Output Manager, and authentication settings on the device through Device Registration Service.

  1. Browse to the Device Registration Service (for example, http://10.16.37.51:9000/device).
  2. Click Devices.
  3. Click Add Device on the Devices toolbar.
  4. Type a device name.
  5. Type the IP address or DNS address of the device.
    The address is specific to the device and does not appear when you configure properties for a device group.
  6. Type the administrator user name for the device.
    The default is admin. The user name is not required to perform an action on the device.
  7. Type the password for the administrator user name.
    By default, there is not a password and the field is empty.
  8. Select the target application.
  9. Configure device properties as described in the following table:
    Property Description
    Default Functionality
    Determines the default functionality for the client:
    • Output Manager: The Print Release page appears when a user presses the application button on the device panel.
    • AutoStore: The AutoStore page appears when a user presses the application button on the device panel.
    Enable Print Release

    Enables Output Manager print functionality. The default value is False.

    Display destination specific documents only

    Enables the user to see only printing jobs that are associated with a specific destination or with a group of destinations. The default value is False.

    Enable Scan

    Enables AutoStore scan functionality. The default value is False.

    Application Name

    The application name that appears on the device panel.

    Open API Login Name

    The login name for the Open API authentication layer. This setting is required if you use the OpenAPI authentication layer on the device.

    To use the OpenAPI authentication layer on a device, turn on OpenAPI authentication and configure a user name and password. The login name specified here must then match the user name specified for the OpenAPI settings on the device.

    Open API Password

    The password for the Open API authentication layer. This setting is only required if you use the OpenAPI authentication layer on the device.

    To use the OpenAPI authentication layer on a device, OpenAPI authentication needs to be turned on and you must configure a user name and password . The password specified here must then match the password specified for the OpenAPI settings on the device.

  10. Click Add Device on the Add Device toolbar.