How to add an application

This task explains how to create a Xerox EIP Connect application profile in Device Registration Service. The application profile defines the server settings for AutoStore, Output Manager, and Device Registration Service.

  1. Browse to the Device Registration Service (for example, http://10.16.37.51:9000/device).
  2. Click Applications.
  3. Click Add Application on the Applications toolbar.
  4. Type an application name.
  5. Select Xerox EIP Connect from the Application Type drop-down list box.
  6. Configure application properties as described in the following table:
    Option Description
    AutoStore Server Address
    The IP address, computer name, or DNS name of the machine where the AutoStore server is installed. The default is the local IP address.
    Important: An entry must be made when using AutoStore or both AutoStore and Output Manager.
    Output Manager Server Address
    The IP address of the machine where Output Manager server is installed. The default is the local IP address.
    Important: An entry must be made when using Output Manager or both AutoStore and Output Manager.
    Output Manager Web Service URI

    The URI for the Output Manager server in the following format: http://<LOCAL IP ADDRESS>:8068.

    You can specify HTTP, Net.TCP, or HTTPS protocols. Output Manager settings should be configured to support the selected protocol.
    Important: An entry must be made when using Output Manager or both AutoStore and Output Manager.
    Web Application Port

    The port number used by the web application. The default is 3241.

    Verify that this port number matches the port number that you specified when configuring AutoStore or Output Manager:
    • If you use AutoStore only, you specified the port number when configuring the component in AutoStore Process Designer.
    • If you use AutoStore and Output Manager, you specified the port number when configuring the component in AutoStore Process Designer.
    • If you use Output Manager only, you specified the port number when configuring Server port on the Clients tab in the Set General Preferences settings of the Administration module in Output Manager.
    Use SSL for Web Application

    Enables secure socket layer (SSL) for the web application. The default is True.

    Application Timeout

    The time after which the Unified Client will timeout. The default is 60 seconds.

  7. Click Save application.